Copyright 2022 - Inmatech Jacek Chłopkowski. All rights reserved.

Gluer to produce large-size cartoons type DFG 3000 is used to match two identical semi-units taken from two feeders located one on another.

The task of the gluer is take two units, fold adhesive parts, put hot melt and match the halves into a ready-made flap box.

There is also an optional possibility of producing dual mode putting glue.
In this case, on the beginning, middle and end of a tongue hot melt is inserted in order to preserve shape of the box. The rest pieces of the gluing tongue are covered with cold glue. Such a solution reduces costs in a gluing process. Gluing with cold glue is much cheaper than using hot melt.

Because just adhesive parts (only glue tongues) are folded it is possible to save much bigger reproducibility than in case of a traditional method. It allows to match semi-units in such dimensions:

keeping relatively small sizes of the machine:

Width of box sides does not matter in a gluing process.

Gluers type DFG are designed in order to simplify operating process and reduce the time to minimum needed for setting the machine into a different format. The machine setting process takes place automatically on the basis of earlier programmed parameters of the box.

Because of the fact that each machine is produced only for an individual client's order there is also a possibility to change techincal properties of the machine so that it can fulfil our client's needs.